SBR 333

Description
Styrene Butadiene rubber Based Mortar Modifying & Bonding Agent.
Areas Of Application
* Bonding agent for old and new concrete
* Repair damaged, spalled concrete and filling of crack
* Suitable for water proofing and laying floor screeds.
Features & Benefits
* Good adhesion to concrete/masonry surfaces
* Improving tensile and flexural properties of repair mortar
* Reduces Water Penetration and shrinkage
* Better abrasion and chemical resistance of cement screed
Polymer Modified Repair Mortar
Cement: 50kgs
Zone 11 Sand: 125kgs
SBR 111/110: 10kg
Water: To get desired consistency
* Lay the polymer modified mortar when the premier coat is tacky.
* Finish the surface as usual.
Application Procedure
* Substrate should be cleaned and free of dust. Use wire brush to remove loose material
* Clean surface with water to remove loose particles and dust before primer
application
Primer Coat
Apply directly or mix cement and SQ SBR in the ratio of 2:1 PBW. Apply as a slurry coat before placing polymer modified repair mortar.
Coverage 30-35 sq. ft. per 1kg in 2 coat approx
Storage & Shelf Life
12 months in original packing
Packaging: 1, 5, 10 & 20kg